Our categories
Our top brands
NEOVIS TOTAL
Ophthalmic lubricant emulsion
with 0.18% sodium hyaluronate
Preservative-free
Hydrates, protects and lubricates
Class IIb medical device
30 single doses x 0.4ml
NEOVIS® TOTAL is an ocular lubricant in the form of a sterile hypoosmolar emulsion with 0.18% sodium hyaluronate (obtained by fermentation), presented in single-dose sachets of 0.4 ml, preservative-free.
Similar products
The composition may be subject to variations, so we advise you to always check the list on the purchased product.
INCI formula: Sodium hyaluronate (0.18%), triglycerides and phospholipids, lipoic acid, hydroxypropyl methylcellulose, sodium citrate, sodium hydroxide, citric acid, sodium chloride and Water for injections.
This medical device is a regulated health product and bears the CE mark. Read the instructions for use carefully.
PRECAUTIONS FOR USE
For external use only. Do not swallow.
Store between 2 and 25°C.
1.Wash hands thoroughly before instilling.
2. Always shake the unidose before instillation.
3. Avoid contact with hands, eyes and eyelids (risk of microbial contamination).
4. This eye drop comes in a single-use container: the unidose must be discarded immediately after use and must not be kept for subsequent instillation (risk of microbial contamination and loss of product performance).
5. Do not use if the single-dose container is damaged (risk of microbial contamination).
6. Do not use after the expiry date indicated on the unidose and box (risk of microbial contamination).
If your doctor has prescribed another eye drop, observe a 15-minute interval between instillations of the two eye drops (risk of altering the effect of the eye drops).
If the problems persist while using NEOVIS® TOTAL, consult a doctor.
Keep out of the reach and sight of Children.
CONTRAINDICATIONS
Do not use in the event of hypersensitivity to any of the ingredients.
NEOVIS® TOTAL is for ocular use. Wash your hands thoroughly before instilling.
1. Open the sachet and detach one single dose from the blister pack, taking care to store the other single doses in the original packaging.
2. Always shake the unidose before instillation.
3. Hold the unit dose vertically (cap upwards) and turn the flat part all the way round to break the seal. The unit is open.
4. Tilt the head back and position the tip of the unit dose over the eye.
Pull the lower eyelid slightly downwards with the index finger, while looking upwards, then press gently on the body of the unit-dose until a drop of NEOVIS® TOTAL is released.
Unless otherwise recommended, instill 1 to 2 drops as often as necessary.
After instillation, a few spontaneous blinks of the eyelids will distribute the emulsion evenly over the ocular surface to form a transparent, long-lasting film.
NEOVIS® TOTAL is compatible with contact lenses.
To view the instructions, click on this link.
Reviews
Questions
